- | / Save up to % Save % Save up to Save Sale Sold out In stock
.svg?v=144615871337664008991737747827)
Crafted with a 45% VLT (Visible Light Transmission), this smoked PPF adds a bold, premium look while shielding your taillights from chips and wear. Designed for those who want to stand out — just be sure to check local laws for taillight film use.
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Most customers install this themselves. We recommend watching the how to video to ensure correct usage.
Watch Installation@teslabros
Exceptional!!!! This was 100% amazing! You guys are super with communication and I appreciate how you helped me out when I ruined one of the pieces. My Cybertruck looks amazing now and everyone keeps asking how I changed it to black!
Daniel
united states
Amazing! The instructional videos were so helpful and covered every step required for applying. Easy to follow along. Some pieces take a little more time and attention. Overall love it!
Jordann
united states
Transformed!! I really wanted to stand out from all the other white model 3s, so I ordered the pillar delete. Everything was pre-cut to fit. This was my first time applying and I couldn't be more happier with the results. The kit came with all the tools needed. Excellent product and excellent service with Tesbros!
Edward
united states
M3P install this past weekend, first timer. Experience overall was good...having a 2nd person helps a lot. Glad it’s done and protected, cheers!
Alex
united states
Fantastic Product. This kit was top notch quality from packaging to tutorial vids, tools and film. The application was very doable for the DIY novice and I'm super impressed with my results. Definitely will recommend..10 out of 10 plus 10!
Michele
united states
Protection kit works and easy DIY instructions. Great product!
Tiffany
united states
Our DIY Protection Kit offers durable, easy-to-apply materials to shield your Tesla from everyday damage.
Shields key spots like door handles, mini rockers, and B-pillars from scratches, chips, and daily wear.
Our protection film is lightweight yet durable, making application a breeze.
Each piece is precision cut for a seamless fit on your Tesla’s most vulnerable small surfaces.
Your Pre-Cut PPF Protection
All Required Tools Included
Step-by-Step Installation Guide
Highly recommend. The tail lights came out so good. Wish they sold reflectors with this kit, but they look so good I don’t mind.
The hardest part is getting the two pieces to line up nicely. Don’t settle for having a sliver of a gap on your lights.
On my first light, I had a sliver of a gap between the two pieces of film. I thought ‘good enough’. On the other side I nailed it, and there’s no gap.
I tried to go back to the first side and I think it started to stretch a little, so I stopped. I feel like the PPF might be a touch long for the piece that’s adjacent to the side reflector.
Take your time, and use plenty of slip.
Finished product looks great, and the tint is very subtle.
I love the look and the install was super easy. I would have given it 5 stars but am curious why it didn’t come with a strip for the brake lights under the tail lights. I think they look weird now and may try to cut the extra tail light pieces to make something work.
I just installed this yesterday on my car and could not be happier. The pieces were precision cut and fit flawlessly and the install was a breeze (even for a novice like me). Highly recommend this if you are interested in smoked out taillights.
Product looks good, but getting the edges to match up is difficult. Would almost be easier if the big section was 1 piece instead of 2.
