Support for Pillar Delete – Color PPF for Model Y Juniper
Complete installation guide and support resources for your Pillar Delete – Color PPF for Model Y Juniper
Read Before You Install
Please review these critical points to ensure a successful installation:
- Surface temperature must be between 60-80°F (15-27°C)
- Clean and degrease the surface thoroughly before application
- Work in a dust-free environment to prevent contamination
- Allow 24-48 hours for full adhesion before cleaning
- Use proper tools that were provided/li>
1 Surface Preparation
Proper surface preparation is crucial for a successful installation.
- Isopropyl alcohol (70% or higher)
- Microfiber towels
- Lint-free cleaning cloth
- Slip solution (mix of water and baby shampoo)
- Squeegee
2 Video Tutorials
Slip & Tack Installation Technique
Installation Guide
Pillar Delete
Installation Guide
How to do edges
Installation Guide
Maintenance & Care
Cleaning Instructions
- Hand wash with pH-neutral automotive soap
- Avoid automatic car washes with brushes
- Use soft microfiber towels for drying
- Do not use abrasive cleaners or wax
Long-term Care
- Park in shade when possible to prevent fading
- Apply ceramic coating for added protection
- Inspect edges regularly for lifting
- Address damage immediately to prevent spreading
Common Issues & Solutions
